|
Items/Model
|
TS200(PLC)
|
|
Picture
|
 
|
|
Principle
|
Solid Waste Incineration Treatment
|
|
Burn Rate
|
Average 250 kg/hour
|
|
Feed Capacity
|
Average 350kg/feeding
|
|
Control Mode
|
PLC(Programmable Logic Controller Incinerator)
|
|
Combustion Chamber
|
1800L
|
|
Internal Dimensions
|
150x110x110cm
|
|
Secondary Chamber
|
750L
|
|
Smoke Filter Chamber
|
Yes
|
|
Feed Mode
|
Manual
|
|
Voltage
|
220V
|
|
Power
|
0.9Kw
|
|
Oil Consumption (kg/hour)
|
Average 28
|
|
Gas Consumption (m3/hour)
|
Average 33.6
|
|
Temperature Monitor
|
Digital Display
|
|
Temperature Protection
|
Yes
|
|
Oil Tank
|
300L
|
|
Feed Door
|
80x60cm
|
|
Chimney
|
10Meter
|
|
Chimney Type
|
Stainless Steel
|
|
1st. Chamber Temperature
|
800℃–-1000℃
|
|
2nd. Chamber Temperature
|
1000℃-1200℃
|
|
Residency Time
|
2.0 Sec.
|
|
Gross Weight
|
8500kg
|
|
External Dimensions
|
300x160x190cm
|
Burner operation should be Automatic On/Off
Fuel : diesel
The supplier must provide necessary information for the best of the installation
This incinerator with “PYROLYTIC” combustion must have:
;
・ Refractory concrete :
§ . Thickness : ≥100 mm
§ . Nature: 42% of Al203
・ Insulate in fibrous panels :
§ . Thickness: ≥75 mm
・ Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.
A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a total recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
* Composition of the refractory;
・ Refractory concrete :
§ Thickness : ≥150 mm
§ Nature: 65% of Al203
・ Insulate in fibrous panel :
§ Thickness: ≥85 mm
Nature: Calcium
以RSS Feed的形式接收此快讯
